- 品牌/商標:拓博
- 企業類型:制造商
- 新舊程度:全新
- 原產地:蘇州
江陰0.2mm的銅絲拉力機江陰2mm鋼絲拉伸試驗機統稱為材料拉伸試驗機用于測試分析各種材料的拉伸,壓縮,剪切,剝離,彎曲等力學性能。此款試驗機可測試0.2mm-3mm的鋼絲,同時,碳鋼絲等其他絲質材料的性能。
更多產品資訊可電話聯系或來廠測試體驗,謝謝
1、 試驗力: 2000N;
2、 準確度等級:優于1級;
3、 負荷測量范圍:0.2%—100%FS;
4、 試驗力示值允許誤差極限:示值的±1%以內;
5、 試驗力示值分辨率:試驗力的1/±200000;
6、 采樣頻率:400次/秒;
7、 變形測量范圍:0.2%—100%FS;
8、 變形示值誤差極限:示值的±0.50%以內;
9、 變形分辨力:變形的1/8000
10、位移示值誤差極限:示值的±0.5%以內;
11、位移分辨力:0.001mm
12、位移速度調節范圍:15-500mm/min
13、位移速率控制:設定值的±1.0%以內;
14、有效試驗寬度:150mm(左右不受限)
15、有效拉伸空間距離:650mm(不安裝測試夾具時)
16、主機外型尺寸(長×寬×高):410×405×1250(mm)
17、使用電源:單相220V 50Hz 1kW;
18、機臺重量:約55kg;
In 1, the maximum test load ( optional: 10kN 20kN );2, the degree of accuracy of better than 1;3, load measuring range: 0.2% - 100%FS;4, test of indication error limit: value of less than ± 1%;In 5, the test force value resolution : the maximum test load 1/ ± 200000;In 6, the sampling frequency: 400 times / sec;7, deformation measurement range: 0.2% - 100%FS;8, deformation value limit of error: value of less than ± 0.50%;In 9, the maximum deformation deformation resolution: 1/8000In 10, the displacement error limit: indication of less than ± 0.5%;In 11, the displacement resolution: 0.001mm12, displacement and speed adjustment range: 50-500mm/min13, rate of displacement control accuracy: set value is less than ± 1%;14, effective width test: 400mm ( and limited )15, effective tensile spatial distance: 1000mm (not installed when the test fixture )16, mainframe exterior size ( length x width x H): 780 x 465 x 1650 ( mm )17, the use of power: single-phase 220V 50Hz 1kW;Machine weight: 18, about 160kg;










