應用:適用于動物細胞懸浮培養及微載體培養。(雜交瘤細胞、CHO細胞、昆蟲細胞、哺乳細胞等)
| 罐體 | 工作體積(L) | 3 | 5 | 7 | 10 |
| 總體積(L) | 3.8 | 6.8 | 8.9 | 12.5 | |
| 材質 | 硼硅酸鹽玻璃/配件和罐蓋為316L不銹鋼 | ||||
| 控制系統 | 控制面板 | 10.4″彩色觸摸屏 | |||
| 通信接口 | 以太網遠程控制(SCADA)、USB接口數據輸出、 RS-485系統擴展 | ||||
| 程序儲存量 | 可儲存59,994個不同參數程序 | ||||
| 數據保存 | 10個數據文件 | ||||
| 數據儲存接口 | USB接口 | ||||
| 箱體材料 | ABS共聚體面板、噴塑外殼 | ||||
| 大小 | 400×500×740mm(W×D×H) | ||||
| 額定電壓 | 110V/220V; 50/60Hz | ||||
| 通風 | 進氣流量計 | 1-10LPM | 2-20LPM | ||
| 噴霧管 | 環形空氣分布器,通氣孔開口向下 | ||||
| 擋板 | 可拆卸的316L不銹鋼擋板 | ||||
| 溫度 | 控制系統 | 恒溫加熱系統:內置熱交換系統(400W加熱器/水循環泵)、自動冷卻水閥 | |||
| 范圍 | 冷卻液+5℃-60℃ | ||||
| 控制 | 0.1℃ | ||||
| 傳感器 | Pt 100 | ||||
| 控制模式 | 可編程15步的PID控制系統 | ||||
| 攪拌 | 驅動 | 可拆卸的頂部無刷馬達 | |||
| 轉速范圍 | 5-300 rpm | ||||
| 控制 | 1rpm | ||||
| 攪拌葉 | 2個可調角度3葉低剪切力攪拌槳 | ||||
| 控制模式 | 可編程15步的PID控制系統 | ||||
| pH | 范圍 | 2-14pH | |||
| 控制 | 0.01pH | ||||
| 傳感器 | 梅特勒耐熱凝膠電極 | ||||
| 控制模式 | PID控制 | ||||
| DO | 范圍 | 0-200% | |||
| 控制 | 0.1% | ||||
| 傳感器 | 梅特勒耐熱DO極譜電極 | ||||
| 控制模式 | PID關聯控制: 控制攪拌轉速升降、 富氧裝置(可選)、開始補料系統 | ||||
| ORP | 范圍 | -/+ 2000mV | |||
| 控制 | 1 mV | ||||
| 傳感器 | 梅特勒耐熱凝膠電極(可選) | ||||
| 消泡/ 液位 | 傳感器 | 316L不銹鋼: 聚四氟乙烯絕緣軟管、開關控制器 | |||
| 蠕動泵 | 數量 | 4個內置,1個外置(可選) | |||
| 流量 | 0.06~341.25ml/min | ||||
| 速度 | 0-65 rpm | ||||
| 控制 | 1rpm | ||||
| 控制模式 | 15步補料控制,控制酸堿、消泡劑和補料 | ||||
| 排氣裝置 | 冷凝器 | 316L不銹鋼冷凝管 | |||
| 過濾器 | 0.22u密理博盤式過濾器 | ||||
| 設備要求 | 電壓 | 210-230V, 50/60Hz,帶有電安全開關 | |||
| 水壓 | 2 Bar(29psi) | ||||
| 氣壓 | 1 Bar(14.5psi),氣體需干燥、游離、經過過濾 | ||||
The Winpact Gas Mixing Station al lows the user to optimize cel l growth conditions by independently supplying up to four gasses to the fermentation process. Winpact Parameters such as dissolved oxygen and pH can be controlled by adjusting the gas composition supplied to the system. The gas mixing station is directly connected to the Winpact control unit, al lowing it to respond to changes in DO and pH.。Four manually adjusted flow meters control the flow rate of each gas, whi le the 4 solenoid valves automatical ly open or close in response to the culture conditions.
The Gas Mixing Station can be operated in both manual or automatic modes.
Function:
Blend air,oxygen,carbon dioxide,and nitrogen in any proportion to optimize cell growth;
Adjust pH using CO2;avoid media dilution by addition of liquid acid; Control DO by addition of O2 gas;
Specifications:
| Control gases | Air, N2, O2 and CO2 | ||
| Control parameter | DO and pH | ||
| Components | 4 solenoid valves, 4 pressure gauges and 4 rotameters | ||
| DO Cascade | One-way(O2) or Bi-directional(O2 & N2) DO control | ||
| Flow rate range Note: The given flow rates are for total flow (4 gasses combined), at a rate of 2vvm. Flow rate range for each gas is customized to user requirements. | Vessel volume | Microbial | Cell culture |
| 3L | 0,1-10 LPM | Avai lable upon Request | |
| 5L | |||
| 7L | 0,2-20 LPM | ||
| 10L | |||
| 15L | 0,4-50 LPM | ||
| 20L | |||
Oxygen Enrichment with Mass Flow controller:
The mass flow control ler is an optional oxygen supplementation device for the Winpact system. Using a cascade response, the mass flow control ler is able to accurately adjust the flow rate of incoming oxygen to control the DO level within the vessel. Resistance to fluctuations in gas flow ensures precise control and repeatabi l ity of experimental conditions.
Function:
Resistant to flow variability from gas pressure changes;
Automatic control of flow rate to gas input;
Precise control of gas flow ratet;
Controlled manually or via DO control loop;
Hassle-free:comes built-in to the controller
Specifications:
| Components | Includes a manual rotameter and a mass flow controller |
| Function | (1) Manual oxygen flow rate adjustment (via Mass flow controller) (2) DO cascade control: Response to DO change |
| Rotameter Range | 3L、 5L:0 – 5 LPM; 7L、10L:0 – 10 LPM; 15L、20L:0 – 20 LPM; |







